| 1050CFM Alcohol Carb 4500 | |
|
|
Author | Message |
---|
Blazonic Veteran Member
Posts : 831 Join date : 2010-02-03 Age : 40 Location : Santa Fe, Tx
| Subject: 1050CFM Alcohol Carb 4500 September 8th 2010, 14:01 | |
| I have a new (four passes) 1050CFM alcohol carb part # 80586. Also will include holley jet kit 138-200 jets and jet extensions with notched fuel bowl. Carb was to small for my set-up and practically brand new. $700 409-789-7430
Last edited by Blazonic on September 13th 2010, 16:26; edited 2 times in total | |
|
| |
XplicitCobra XP Member
Posts : 1327 Join date : 2010-02-13 Age : 46 Location : Nashville,TN. but from Harlingen,TX.
| Subject: Re: 1050CFM Alcohol Carb 4500 September 8th 2010, 14:09 | |
| Damn, too small?? That must be a monster motor. We had a Dominator on a 454 bored 60 over. | |
|
| |
Trailer Trash Racer XP Member
Posts : 1856 Join date : 2010-02-03 Age : 36 Location : Houston, Texas
| Subject: Re: 1050CFM Alcohol Carb 4500 September 8th 2010, 14:13 | |
| That's why he's numero uno in the XP fastest Eddie | |
|
| |
XplicitCobra XP Member
Posts : 1327 Join date : 2010-02-13 Age : 46 Location : Nashville,TN. but from Harlingen,TX.
| Subject: Re: 1050CFM Alcohol Carb 4500 September 8th 2010, 14:14 | |
| | |
|
| |
Blazonic Veteran Member
Posts : 831 Join date : 2010-02-03 Age : 40 Location : Santa Fe, Tx
| Subject: Re: 1050CFM Alcohol Carb 4500 September 8th 2010, 14:22 | |
| Just a Lil small block I believe its in the metering blocks that make it to small. The 1050CFM is enough but the metering block are not big enough to flow the 190 jets that are needed for Alcohol even tho its a alcohol carb. its for a mild-medium motor. | |
|
| |
XplicitPerformance Admin
Posts : 8916 Join date : 2010-02-03 Age : 42 Location : SE Houston
| Subject: Re: 1050CFM Alcohol Carb 4500 September 8th 2010, 18:44 | |
| Did you decide against alcohol? | |
|
| |
brian_rs/ss Member
Posts : 131 Join date : 2010-09-01 Location : Afghanistan
| Subject: Re: 1050CFM Alcohol Carb 4500 September 8th 2010, 19:27 | |
| i want this for my gf's honda. | |
|
| |
XplicitPerformance Admin
Posts : 8916 Join date : 2010-02-03 Age : 42 Location : SE Houston
| Subject: Re: 1050CFM Alcohol Carb 4500 September 8th 2010, 19:57 | |
| - brian_rs/ss wrote:
- i want this for my gf's honda.
Should bolt up with some fabrication alot of duct tape and jb weld! | |
|
| |
Blazonic Veteran Member
Posts : 831 Join date : 2010-02-03 Age : 40 Location : Santa Fe, Tx
| Subject: Re: 1050CFM Alcohol Carb 4500 September 8th 2010, 20:50 | |
| - XplicitPerformance wrote:
- Did you decide against alcohol?
I want to buy some tires, shocks and a couple other little things so instead of letting it sit on the shelf and go bad | |
|
| |
BT03Mach-1 XP Member
Posts : 1603 Join date : 2010-02-03 Age : 112 Location : Friendswood, TX
| Subject: Re: 1050CFM Alcohol Carb 4500 September 9th 2010, 07:40 | |
| i may just put this on my mach and keep it.... we both run on alcohol | |
|
| |
Sponsored content
| Subject: Re: 1050CFM Alcohol Carb 4500 | |
| |
|
| |
| 1050CFM Alcohol Carb 4500 | |
|