whats up guys just an intro

Newb Posts : 24 Join date : 2011-05-28

Hey guys how u doing my name is cesar and I have meet some of u at HD meet.
I drive a charger srt8 pretty stock just intake, exhaust, underdrive pulley, and spacer FOR NOW as in a few months but for those beginner things its pretty quick.

whats up guys just an intro 2011-05-27_17-00-15_427

whats up guys just an intro 2011-05-27_17-00-15_427

whats up guys just an intro 010811_Luling_Cruise_53

whats up guys just an intro 010811_Luling_Cruise_115

whats up guys just an intro 010811_Luling_Cruise_114

Welcome to the site. I saw your ride out at HD last night. I left a bit early though but it looked clean. How did the meet end up last night?

Newb Posts : 24 Join date : 2011-05-28

thanks man it was good I liked it i got to run jakes jeep and the trailblazer

cesar aka sammy wrote:: thanks man it was good I liked it i got to run jakes jeep and the trailblazer

how did that go? They both run fairly decent.

Newb Posts : 24 Join date : 2011-05-28

it was pretty good we did 30 rolls I won by a lil bit

Welcome to the site!

cesar aka sammy wrote:: it was pretty good we did 30 rolls I won by a lil bit

yeah that Jeep isn't the best from a roll but a dig it rolls out fairly well. Cesars TBSS does pretty well for being a handheld tuner only.

Newb Posts : 24 Join date : 2011-05-28

yeah they did run well here in the next 1000 miles I plan on going longtubes, port polish TB, ported intake manifoldrunners, and a dyno.flaco tune

cesar aka sammy wrote:: yeah they did run well here in the next 1000 miles I plan on going longtubes, port polish TB, ported intake manifoldrunners, and a dyno.flaco tune

Who are you planning on using for the port work on the 6.1 intake? I got aguy who has done some for some of the better running Hemis around Houston. They picked up some ET with nothing but his port work. He is very reasonable compared to what most charge to port the hemi intake.

Newb Posts : 24 Join date : 2011-05-28

let me know who? I was either gonna use xtratorq in dallas or modern warefare here in houston.
Trying to keep my car very reliable since I drive between here and waco very often, im also planning a 75 or 100 shot

How much are they quoting you for the port work?

Newb Posts : 24 Join date : 2011-05-28

TB 185 for porting and 40 for polishing, Intake 399 basic porting or 750.for stage 2

what does their stage 2 consist of? I know we do ported TB and intake for about 500$

Newb Posts : 24 Join date : 2011-05-28

"The basic just CNC ports the runners. Stage 2 goes to the inside of the manifold." damn $500 for both thats pretty good

cesar aka sammy wrote:: "The basic just CNC ports the runners. Stage 2 goes to the inside of the manifold." damn $500 for both thats pretty good

yeah although my guy doesn't CNC them but he does port the inside of the plenum as well as the TB opening.

Newb Posts : 24 Join date : 2011-05-28

How does he port them? and does the CNC make a difference? whats his turn around and what route should i go

He hand ports every manifold he does. He has quite a few SRT intakes under his belt now. It will take him approximately 2-3 days if he has nothing on the table currently. Also you could save a little money without having to ship them as well.

Newb Posts : 24 Join date : 2011-05-28

whos this guy? when could we do this? and how do I get a hold of him?

Subject: Re: whats up guys just an intro May 29th 2011, 17:14 PM sent.

PM sent.

welcome

Newb Posts : 24 Join date : 2011-05-28

thanks man

Car looks good

Welcome to XP. Damn good looking ride and paint job. Almost a paint job like mine. U can see some in my Sig.

» whats up everybody
» whats going on Dru?
» Whats da deal xplicit....!